[ Prev ]    Page:   1    2    3    4    5    6    7    8    [ Next ]

PDF version for print


 

CamassCrete CS1000A / CS1000W

 

CS1000A / CS1000W system is a continuous improvement on CamassCrete product line. The new Flank Caps securely interlock on the grooves at four sides of UniPanel (main panel). The patented Cable Trench system, a continuous grid-form cable trenches throughout the floor plan, provides free accessibility to users and maximum capacity for network's cable distribution and extension. The unique invention Socket-Set-Screw system contributes super-low installation at FFH (finish floor height) from 60 mm down to 40 mm, which traditional access floors are not capable to install.

 

Users Friendly

Reticulated Cable Trench System: Grid-form Cable Trench system provides cable runway of inside width 110 mm (4.33") within every 600 mm. The trench caps are easily lifted and accessible by access floor installers, network technicians, and office users.
Low-Profile, least sacrifice ceiling height: The unique Socket-Set Screw system enables installation height low to 40 mm ~ 60 mm (1.57" ~ 2.36") while still facilitate high cable capacity running inside the Cable Trenches.
Stability: The self-stand UniPanels (main panel) is structured with 4 pedestals at four corner of the panel. The UniPanels, with four built-in pedestals, are standing independently. In the event of earthquake or unusual strong impact, the system will not be collapsed.
Safety, No hazard: During re-routing or re-location, the technicians or office users just lift the Cable Trench caps by hand. If the site was installed with traditional access floor, the user has to use mechanic tools, such as panel lifter, to lift the panel. Each steel cementitious or calcium sulphate structured access panel is normally weighted 12 to 15 kg (26 to 33 lb) per piece and it is not safe to operate by office people and may cause hazard.

 

Infinite flexibility and cost effectively

  • Easy routing and extension of cables: Through Cable Trenches, power, data and voice cables, or even facility pipes are organized distributed and extended.
  • Extension of cables to any point of furniture, partition, and workstation is unlimited.
  • Maintenance costs can be neglected.
  • Pedestals are not glued to the ground. Removal of pedestals will not damage the ground. In the event of re-location, all components are re-usable.
     

    Self-stand UniPanel (main panel) connecting by Base Connector to form the Cable Trenches.
    The Base Connectors and Pedestals are not glued to the sub-floor and not causing damage to the sub-floor. The unique composition of UniPanels and Base Connectors provide maximum cable capacity and systematic cable routing, extension and connection.

 

[ Prev ]    Page:   1    2    3    4    5    6    7    8    [ Next ]

PDF version for print


Netfloor, Inc. All Rights Reserved.