|
|
|
|
The System Camass is designed especially for height below 100 mm (4.0"). The system has two height groups because of different fasten systems.
|
|
I. Low-Profile |
|
CA1000-60: |
60
mm |
(2.36")
|
|
CA1000-76: |
76
mm |
(3.0")
|
|
CA1000-100: |
100 mm |
(4.0")
|
|
|
II. SuperLow-Profile
|
|
CA1000-40: |
40
mm |
(1.57")
|
|
CA1000-50: |
50
mm |
(2.0")
|
|
|
Description of components The system is composed of four main components: UniPanel (main pane), Base Connector, Central Cap and Flank Cap.
|
|
UniPanel
(main panel): made of galvanized steel, riveted structure that is high strength and light weight. Each UniPanel has four built-in pedestals at four corners of the panel body. Size of UniPanel: 510 x 510 mm (20.07" x 20.07") Edges: 4 mm recession, 15 mm width at panel borders.
|
|
Base Connector: To connect UniPanels at pedestals. Central Cap: Capping Cable Trench at intersection. Flank Cap: Capping Cable Trench at flanks of UniPanel.
|
|
Reticulated Cable Trenches
|
|
|
|
The grid-form cable trench system provides systematic, easy routing and extension of cables. During installation, the Base Connectors connect UniPanels at pedestals, standard distance Cable Trenches formed automatically. Trench caps cover the Cable Trenches installed either before, or after routing of cables.
|
|
Safety: As all UniPanels are self-standing, lifting or replacing of trench caps are safe, convenient and without resorting to special tools.
|
|
For new buildings
|
|
Renovation & upgrading: Camass are often installing above old floor trunks
|
|
|
|
|
|
|
|
Netfloor,
Inc. All Rights Reserved. |
|