Ramp and Skirting

System: Netfloor CamassCrete CS1000A series

1. Module set:

1.2 System height:

1.2.1 Super Low-Profile: 40 mm (1.57"), 50 mm (2.0"), 60 mm (2.36")
1.2.2 Low-Profile: 76 mm (3"), 100 mm (4"), 150 mm (6")

2. Main Components:
2.1 UniPanel (Main Panel)
Size: 510 x 510 mm (20.07" x 20.07")
Grooves: at four side of panel top, width 5 mm, length 410 mm, depth 8 mm.
Top plate and bottom plate of panel: steel, corrosion protection with powder coating.
Panel body in-filled with light weight cement.
Pedestals: Galvanized steel, fixed at four corners. Assembled to system's required height.
2.2 Base Connector: steel, corrosion protection by powder coating or electro-deposition.
2.3 Central Cap: steel, thickness 2.3 mm, corrosion protection by powder coating or electro-deposition.
2.4 Flank Cap: steel, thickness 2 mm, corrosion protection by powder coating or electro-deposition, ribs reinforced, 8 mm bent at flange to form a L-shape, bent flanges sealed by u-shape PVC trim to eliminate noise when contacting at grooves of the UniPanel.

3. Cable Trench capacity
3.1 Inside width: 110 mm (4.33")
3.2 Cable Trench opening width: 90 mm (3.54")
3.3 Cable Trench clearance: system height minus 5 mm.
3.4 Cable capacity under UniPanel (main panel): system height minus 28 mm.

4. Loading Property: UniPanel, in accordance with ASTM E-196
4.1 Concentration Load:
by 1 inch diameter indenter
300 kg < 2.0 mm depression (660 LB < 2.0 mm depression)
4.2 Concentration Ultimate Load:
by 1 inch diameter intenter
greater than 900 kg ( > 1,980 LB)
4.3 Uniform Ultimate Load: greater than 50 psi

5. Flammability: Non-combustible. Meet BS476, part 4, ASTM E-84 class 1.

6. Surface Floor Covering: Commercial rate carpet tile, or vinyl tile of more than 4.5 mm thick are standard surface flooring on top of the system.

7. Warranty: 5 years limited warranty.

In pursuing quality improvement, the manufacturer reserves the right to vary specifications without prior notice.

Netfloor, Inc. All Rights Reserved.